Beurer Tl41 Touch Daylight Lamp For Sad Therapy

Price history

About this product

Product details This light therapy lamp from Beurer simulates natural daylight to help lift your mood, motivate, and energise you. The LED lamp emits 10,000 lux of light, which equates to that from the sun on a summers day. The compact design lends itself well to a dimly lit office environment. With the touch of a button, the UV-free light will shine at an effective intensity of 10,000 lux at a distance of 20cm. Theres even the option to wall mount the TL41 at home, so you could sit comfortably and enjoy the benefits as part of your daily routine. Light therapy is commonly recommended by the NHS to support those who experience Seasonal Affective Disorder (SAD). Many see a change in their mood after 7 days of consecutive use. Key Features:Sturdy fold-out stand plus wall hanging option. LED technology. Simple touch button operation. Product Specifications:Size: 21cm x 27cm x 7.6cm. Mains powered How to use Insert the mains part into the mains connection. Touch the ON/OFF sensor. Position yourself as close as possible to the lamp, at a distance of between 20 cm and 50 cm. You can continue to go about your day-to-day activities during application, including reading, writing, making telephone calls, etc. Keep looking directly into the light for a short period of time, as it is absorbed and shows an effect via the eyes/retina. Use the daylight therapy lamp as often as you like. However, the treatment is most effective if you carry out the light therapy for at least 7 successive days according to the prescribed times. The most effective time of day for the treatment is between 6 a.m. and 8 p.m. and we recommend that it is used for 2 hours per day. However, do not look directly into the light for the entire application period, as this may cause over-stimulation of the retina. Start with a brief application period and gradually increase the time over the course of a week. Product placement requirements: 1. First, open the support fully, the product is placed horizontally to avoid tilting. 2. Do not shake the product when it is placed to avoid falling.3. Do not touch the supporting foot when placing the product, so as to avoid falling.4. Do not pull the power adapter wires in the use of the product to avoid falling down. Note:You may experience pain in the eyes and head after the first few applications. This pain should disappear in further sessions as the nervous system becomes accustomed to the new stimuli. We recommend a distance of between 20 and 50 cm from the face to the lamp during application. Hazards and Cautions The daylight therapy lamp is only intended for radiation on human bodies. Before use, ensure that there is no visible damage to the device or accessories and that all packaging material has been removed. If you have any doubts, do not use the device and contact your retailer or the specified Customer Service address. Ensure that the daylight therapy lamp is positioned on a stable base. The device must only be connected to the mains voltage that is specified on the type plate. Never submerge the device in water or other liquids and do not use it in the bathroom. It must not be used on people with disabilities, children under 3 years of age or people with reduced sensitivity to heat (e.g. people with skin alterations due to illness), after taking pain relief medication, alcohol or drugs. People who are not conscious should not use the product. Keep packaging material away from children (risk of suffocation!).If the device is warm, do not cover it or pack and store it. Always unplug the device and allow it to cool down before touching it. Do not touch the device with wet hands when it is plugged in and do not allow water to spray on the device. Only operate the device if it is completely dry. Ensure that you only insert and remove the mains cable and the plug with dry hands and that you only touch the ON/OFF sensor with dry hands. Keep the mains cable away from hot objects and naked flames. Protect the device from heavy impact. Do not pull on the mains cable when you wish to pull the plug out of the socket. Do not use the device if it shows signs of damage or does not function properly. In such cases, contact Customer Services. If the mains cable of this device is damaged, the device must be disposed of. Disconnection from the power supply network is only guaranteed if have you unplugged the plug. Do not use the device in the presence of flammable anaesthetic gas connections with air, oxygen or nitrogen oxide. No calibration and no preventive checks or maintenance need to be carried out on this device. You cannot repair the device. The device contains no parts that you can repair. Do not make any changes to the device without the manufacturer's permission. If the device has been changed, thorough tests and checks must be carried out to ensure the continued safety of further use of the